GeM Logo, Government of India
gem gem
  • Dark Mode
  • Font Size A- A A+
  • Skip to Main Content  

CPPP Tenders

The following are the list of the tenders which are published on the CPPP. The users may use the filters as per the requirement.


Disclaimer

All information about various Tender Documents published on this page is being provided by CPP portal to facilitate faster dissemination and easy access to information related to Tenders. Portal Policies laid down by the CPP portal are also applicable on the Information available under this Link on GeM and GeM does not hold any responsibility for the accuracy, authenticity and validity of information. Users are advised to verify/check information with the relevant Government department(s) and/or other source(s), and to obtain any appropriate professional advice before acting on the information provided in the Portal. CPP Portal Policies


Tender ID
Tender Title
Organization Name
Bid Sub. Closing Date
Availability Report Id
 
 
Bid Submission Closing Date Tender Opening Date e-Published Date Title/Ref.No./Tender Id Organisation Name Corrigendum GeM Availability Report Id Download
06-January-2025 02:25:00 PM 05-December-2024 10:34:51 AM 05-December-2024 10:34:51 AM TRACTION MOTOR CABLE CONNECTION BOLT ASSLY. CADMIUM PLATED CONSISTING OF( I). HEX HEAD CAP SCREW SIZE 3/8 inch -16-UNC-2A X 1 1/2 INCH LONG (2) ONE ELASTIC STOP NUT 3/8 INCH 16 UNC-3B (3) ONE SPRING LOCK WASHER 3/8 INCH (4) TWO PLAIN WASHSER 3/8 INCH.DRG NO.(i)2 P-11603-048 ALT. R 2 (II ) 01 P-64005 -16 (III) 1 P-83502 - 016 ALT. R 3. (IV) 1 P- 83002-016 ALT. R 1. ACCEPTED / MAKE BRAND -UNBERAKO, DFL, MFR. BY M/S- DEEPAK FASTENERS LIMITED OR ITS EQUIVALENT, STD- QUALITY BS: 1768 PROPARTY G/53241399/106544807 Ministry of Railways N/A N/A
06-January-2025 03:00:00 PM 05-December-2024 11:59:10 AM 05-December-2024 11:59:10 AM CNC Axle Turning Lathe Machine/11245539/106544801 Ministry of Railways N/A N/A
30-December-2024 03:00:00 PM 05-December-2024 11:54:39 AM 05-December-2024 11:54:39 AM CNC Axle Grinding Machine/11245540/106544798 Ministry of Railways N/A N/A
06-January-2025 10:30:00 AM 05-December-2024 10:03:18 AM 05-December-2024 10:03:18 AM Set of Suspension Tube Tapered Roller Be [Set of Suspension Tube Tapered Roller Bearing consisting of 02 items confirming to RDSO specification NO.MP.0.2402.17 (Rev.02 ) March 2021 with corrigendum dated:-14/09/2012 (A) Road Wheel End Bearing (Non-Gear End) as per M/S NEI LTD. Part No.-67981/67919 &Drg.No.PESD-6019, or M/S SKF LTD. Drg NO.67981/67919/VU1701 OR M/S TIMKEN LTD.Drg. NO.-67981/67919 OR M/S FAG LTD. Drg. NO.- FAG Part NO.Z-566565.TR1, QTY-02 NOS. (B) Gear Wheel End Bearing as per M/L2246374/106544793 Ministry of Railways N/A N/A
09-January-2025 02:00:00 PM 05-December-2024 09:12:15 AM 05-December-2024 09:12:15 AM ERV (APM) for ESCORTS Design BMBS. Drawing No. : Escorts Drg. No. 3EB7346. Material and Specification : As per operation and maintenance manual of Escorts make BMBS for Freight Stock with Casnub Bogie; Doc. No. RED-RD-BS-019-OM-01; RDSO,s Spec. No. WD-23-BMBS-2008 (Rev. 1) Amendment No.1 of Sept., 2016./38244001A/106544787 Ministry of Railways N/A N/A
08-January-2025 11:30:00 AM 05-December-2024 06:07:06 PM 05-December-2024 06:07:06 PM Description : FOLDABLE IOL,MONOFOCAL,HYDROPHOBIC ,ASPHERIC, ABERRATION CORRECTING, GLISTENING FREE SCRATCH RESISTANT WITH INJECTOR SYSTEM./62242705A/106544785 Ministry of Railways N/A N/A
09-January-2025 02:00:00 PM 05-December-2024 09:02:38 AM 05-December-2024 09:02:38 AM LOCKING PLATE FOR AAR TYPE CARTRIDGE ROLLER BEARING/38241499/106544786 Ministry of Railways N/A N/A
09-January-2025 02:00:00 PM 05-December-2024 08:45:26 AM 05-December-2024 08:45:26 AM 1/2 (12.70 mm) Dia. Zinc plated/Galvanized Lock Bolt./38243863/106544784 Ministry of Railways N/A N/A
07-January-2025 02:00:00 PM 05-December-2024 08:34:35 AM 05-December-2024 08:34:35 AM Swing Door Frame with Panel (RH)./38243361/106544783 Ministry of Railways N/A N/A
07-January-2025 11:30:00 AM 05-December-2024 06:03:41 PM 05-December-2024 06:03:41 PM GUIDE WIRELESS MINIMALLY INVASIVE SCREWS (PEDICAL) 1.MINIMALY INVASIVE SCREWS WITHOUT GUIDE WIRE. 2.DIAMETER SIZE SHOULD HAVE OF 4.5 MM, 5.0 MM, 6.0 MM, 7.0 MM, 7.5 MM. 3.LENGTH SHOULD BE 30 MM, 35 MM, 40 MM, 45 MM, 50 MM, 55 MM, 60 MM. 4.SHOULD BE COMPATIBLE WITH 5.5 MM DIAMETER ROD SYSTEM. 5 USFDA,CE approved/62243878A/106544782 Ministry of Railways N/A N/A

Showing 24040 to 24050 of 26,242 entries